Dry and wet vacuum cleaner maintenance.The dry and wet dual-use industrial vacuum cleaner that industrial vacuum cleaner says inside our course of study namely, this kind of industry USES vacuum cleaner just as its name implies namely can absorb water to also can absorb dust.But this kind of industrial vacuum cleaner is more complicated than ordinary industrial vacuum cleaner.Today we suzhou kreis environmental protection technology co., LTD. Will introduce to you in detail the dry and wet industrial vacuum cleaner before use, during use, and later maintenance needs to pay attention to some elements.
First of all, we introduce the dry and wet dual purpose vacuum cleaner in the use of the need to pay attention to a few points:
I. preparation before use of dry and wet industrial vacuum cleaners:
1. Check whether the working voltage of dry and wet dual-purpose vacuum cleaner is consistent with the voltage mark on the nameplate of the machine, otherwise it shall not be used;
2. Check whether there is any damage to the power cord, plug, switch and other parts of the dry-wet vacuum cleaner, otherwise it needs to be repaired or replaced;
3. Check whether the switch of dry and wet vacuum cleaner is aligned with the four corners of the barrel body, otherwise it needs to be adjusted again.If the switch and square mouth are off-position, it is easy to damage the function of other parts.
4. Check whether the dry and wet vacuum cleaner bucket is clean and whether the accessories (straw, pickpocket, dust compartment bag, etc.) are blocked;
5. Check the suction condition of the whole dry and wet vacuum cleaner and confirm whether it is normal; otherwise, check the connection position of each connecting part and whether the sealing ring of the machine head base is good;
6, check and confirm the cleaning task of the operating environment, if vacuuming, need to install dust grid dust bag, if water absorption, do not use dust grid dust bag, but can not use dry and wet dual-purpose vacuum cleaner in the debris or silt too much site use.
Two, dry and wet dual-purpose vacuum cleaner operation during the attention:
1, check whether the dry and wet dual purpose vacuum cleaner motor plug is inserted and stable, otherwise the motor running fluctuation after electrification, leading to insufficient suction, and will affect the service life of the motor;
2, dry and wet dual-purpose vacuum cleaner or water absorption flexible control of motor, such as dual motor motor, if only one motor can achieve the purpose, there is no need to start another motor, such as large area of cleaning, it is necessary to use more than double motor cycle work;
3, dry and wet dual-purpose vacuum cleaner work in the foam or foam production of many working environment, must be put in the barrel of defoaming agent, foam elimination, can not let the foam follow the strong airflow into the motor;
4, in the use of dry and wet dual-purpose vacuum cleaner, the power supply should not be too long, can not be extended without permission, the line diameter should not be less than the requirements of the machine, at the same time, the power line should not circle around to generate magnetic field, resulting in insufficient voltage of the machine;
5, pay attention to the dry and wet dual-purpose vacuum cleaner motor noise changes, if the motor noise sudden and deep, it needs to check each connection pipe, or capacity is full, at this time need to clean the pipe or barrel objects;
6, when the dry and wet dual purpose vacuum cleaner suction liquid objects need to be cleaned, need to take off the machine head, do not put the machine upside down, ensure that the liquid does not enter the motor, and ensure that there is no corrosive objects into the motor, so as to avoid damage.
Three, dry and wet dual-purpose vacuum cleaner maintenance work:
1, timely cleaning of dry and wet dual purpose vacuum bucket sundries and dust collection accessories, cotton dust grid and high efficiency filter need not be regularly cleaned, and check whether perforation or leakage, under normal circumstances, cotton dust grid, monthly cleaning and drying, a year to replace.The hepa filters are checked once a week and brushed with a soft bristle brush to remove dust. They are replaced once a year.
2. Check whether the power cord and plug of the dry and wet vacuum cleaner are damaged. After use, wind the power coil into a bundle and put it on the hook of the top cover of the machine head;
3, dry and wet dual-purpose vacuum suction work after check whether there is no blockage or debris, otherwise need to clean, check whether floating wave damaged;
The machine should be handled with care and cannot be struck by external force.