How to deal with the aging of the cement floor of the factory and the ashing and sanding

In factories, especially machinery factories, forklifts travel back and forth. The ground is often subjected to external friction or impact, as well as chemical and oil pollution. In addition, the cement floor has a short service life, and the concrete floor ash is quickly formed under aging weathering. Sanding, matt, hollow drums, cracks, holes, breakage and many other problems require timely curing process to be ground and solidified.
Floor curing is a dust-free ground construction process that solves the problem of ash and sand on the ground and creates a dust-free and healthy working environment. The main floor material used is concrete curing agent, which is hydrated with cement in concrete to produce non-expanded, non-shrinking, stable chemical products (CSH), which makes the whole ground more compact, sturdy and intelligent. The grinding machine is ground and polished to obtain a high-hardness, high-density, high-brightness concrete solidified ground. The problem of ashing and sanding on the ground is solved from the root. The ground is not only more wear-resistant and pressure-resistant, but also more durable.

The steps of treating the cement floor with a solidification process:
First, the base surface cleaning: clean the ground garbage, check the ground conditions to remove hard materials such as expansion screws.
Second, coarse grinding and leveling
Dry the ground with a smart floor grinder and a metal grinding disc until the concrete surface is even and flat, and the ground dust is cleaned.
Third, concrete curing agent penetration
Use a vacuum cleaner to clean the floor before lifting the curing agent, or clean the floor with dust, then spray the concrete curing agent.
Fourth, fine grinding
After confirming that the concrete curing agent has dried out, the ground polishing machine is combined with the resin grinding disc to further grind the ground.
Five, fine polishing
Push the floor clean with a clean dry dust, then polish it with a high-speed polishing pad, and polish it if it is applied with a protective agent.www.chinavacuumcleaner.com

LEAVE YOUR MESSAGES

Send Inquiry Now